Power Chuck P PowerChuck P Chucks
PowerChuck P standard Chuck
ER-024312PowerChuck P 158 x 198
Enlarge image
Request offer
VersionExtra-flat version. Height 51 mm.
Base plate 158 mm x 198 mm.ConnectionsOn the side or at the rear with two lines.OperationWith airjet, laterally. With control unit through
the two lines on the side and at the rear.
Technical data PowerChuck P
Repeatability: 0.002 mm (0.00008“)
Indexing: 4×90° divisible
Chuck clamping power: 10‘000N, generated by springs.
Chuck opens with: 6 bar (88 psi) compressed air
Recommended workpiece size: 160x160x250xmm (6.3×6.3×10“)
Operating manual
Request PDF
ER-029391PowerChuck P ø 150
Enlarge image
Request offer
VersionExtra-flat version. Height 51 mm. Base plate ø 150 mm.ConnectionsOn the side or at the rear with two lines.OperationWith airjet, laterally. With control unit through the two lines on the side and at the rear.
Technical data PowerChuck P
Repeatability: 0.002 mm
Indexing: 4×90° divisible
Chuck clamping power: 10‘000N, generated by springs.
Chuck opens with: 6 bar compressed air
Recommended workpiece size: 160x160x250xmm
Operating manual
Request PDF
ER-029392PowerChuck P ø 204
Enlarge image
Request offer
VersionExtra-flat version. Height 51 mm. Base plate ø 204 mm.ConnectionsOn the side or at the rear with two lines.OperationWith airjet, laterally. With control unit through the two lines on the side and at the rear.
Technical data PowerChuck P
Repeatability: 0.002 mm
Indexing: 4×90° divisible
Chuck clamping power: 10‘000N, generated by springs.
Chuck opens with: 6 bar compressed air
Recommended workpiece size: 160x160x250xmm
Operating manual
Request PDF
ER-029436PowerChuck P without base plate
Enlarge image
Request offer
VersionExtra flat version. Height 33 mm. Without base plate.ConnectionsAt the rear according the instruction manual.OperationPneumatically. Operating manual
Request PDF
ER-044310PowerChuck P 158 x 230
Enlarge image
Request offer
VersionExtra-flat version. Height 51 mm.
Base plate 158 mm x 230 mm.ConnectionsOn the side or at the rear with two lines.OperationWith airgun on the side. With control unit through
the two lines on the side or at the rear.InformationThe borehole pattern of this plate fits 40mm and 50mm T-slot distances.
Technical data PowerChuck P
Repeatability: 0.002 mm (0.00008“)
Indexing: 4×90° divisible
Chuck clamping power: 10‘000N, generated by springs.
Chuck opens with: 6 bar (88 psi) compressed air
Recommended workpiece size: 160x160x250xmm (6.3×6.3×10“)
Operating manual
Request PDF
PowerChuck P special Chucks
ER-106250PowerChuck P with air ducts
Enlarge image
Request offer
VersionExtra-flat version. Height 51 mm.
Base plate ø 150 mm.
With two lines each for operation of the chuck and air. conductConnectionsOn the side or at the rear with two lines.OperationWith airjet, laterally. With control unit through the two lines on the side and at the rear.
Technical data PowerChuck P
Repeatability: 0.002 mm
Indexing: 4×90° divisible
Chuck clamping power: 10‘000N, generated by springs.
Chuck opens with: 6 bar compressed air
Recommended workpiece size: 160x160x250xmm
Operating manual
ER-029422PowerChuck P / R
Enlarge image
Request offer
VersionPowerChuck P with rotatable connection,
max. 50 rpm.ConnectionsTwo lines to the rotatable connection.OperationWith control unit, manually and automatically.ApplicationFor use on dividing heads and round tables. CPWS is Chinese manufacturer of compatible EROWA,3R EDM,wire EDM jig workholding fixture clamping tools for tool die mould makers,CPWS make products at lower cost, good accuracy, fast shipping,
www.workholdingtool.com,
www.erowa-system3r-edm.com,