China Precision Workholding System Inc CPWS
manufacturer of Compatible EROWA EDM tooling,chuck,electrode holders, components for ITS tooling system.
Standard Pallets / Holders
ER-009214Centering plate 50
50 pieces
Enlarge image
Request offer
VersionCorrosion-resistant, including
4 supporting feet each.ApplicationSmall electrode weights.MountingMounted directly on plane surface of blank.
ER-009219Uniplate
12 pieces
Enlarge image
Request offer
VersionSet of 12 units, surface 51 x 51 mm faced, including 2 x M6 bolts for each unit.ApplicationTo mount electrodes and workpieces with a base surface of more than 50 mm.To fit blankWith 2 x M6 bolts into the base surface.
ER-009222Prisround
12 pieces
Enlarge image
Request offer
VersionSet of 12 units, square 26.5 mm milled, including
2 setscrews for each unit.ApplicationTo mount electrodes and workpieces with a base surface up to 25 mm.MountingInsert and tighten setscrews. If necessary, center
with spacer plate ER-010532.
ER-009226Uniblank
12 pieces
Enlarge image
Request offer
VersionSet of 12 units, fitted without machining of body.ApplicationTo mount electrodes and workpieces of various shapes.MountingAs required.
ER-010627Uniplate Alu 80 x 80
4 pieces
Enlarge image
Request offer
VersionSet of 4 units, aluminum, system size 100, with M8 supports.ApplicationTo mount electrodes and workpieces with a base surface of more than 70 mm.MountingWith 4 x M6 bolts into the base surface.
ER-010793Uniholder
12 pieces
Enlarge image
Request offer
VersionSet of 12 units, groove 20 mm faced, including
2 setscrews for each unit.ApplicationTo mount electrodes and workpieces with shaft sizes of up to 20 mm.MountingInsert and tighten setscrews. If necessary, center with spacer plate ER-010532.
ER-011599Centering plate 100 M8
10 pieces
Enlarge image
Request offer
VersionCorrosion-resistant, including
4 supporting feet M8 and 4 x M5 screws per plate.ApplicationWorkpieces and electrodes.MountingMounted directly on of blank plane surface of blank.
ER-033717PC 210 Cover with RCS
Enlarge image
Request offer
VersionAluminium anodized.ApplicationPrevents penetration of chips and dirt into the ProductionChuck 210. For automatic handling.
ER-036657Centering plate G Inox
1 unit
Enlarge image
Request offer
VersionGround, including 8 supporting feet M8.ApplicationFor workpieces, jigs and fixtures in chip-removal machining.Fixation of blankAccording to accompanying fitting instructions.
ER-036751Centering plate 50
set of 5 units
Enlarge image
Request offer
VersionCorrosion-resistant, including
4 supporting feet each.ApplicationSmall electrode weights.MountingMounted directly on plane surface of blank.
ER-050195Centering plate 100 M8
1 unit
Enlarge image
Request offer
VersionCorrosion-resistant, including
4 supporting feet M8 and 4 x M5 screws per plate.ApplicationWorkpieces and electrodes.MountingMounted directly on of blank plane surface of blank.
ER-103737Uniblank
10 pieces
Enlarge image
Request offer
VersionSet of 10 units, fitted without machining of body.ApplicationTo mount electrodes and workpieces of various shapes.MountingAs required.
ER-103739Prisround
10 pieces
Enlarge image
Request offer
VersionSet of 10 units, square 26.5 mm milled, including
2 setscrews for each unit.ApplicationTo mount electrodes and workpieces with a base surface up to 25 mm.MountingInsert and tighten setscrews. If necessary, center
with spacer plate ER-010532. Operating manual
ER-103742Uniholder
10 pieces
Enlarge image
Request offer
VersionSet of 10 units, groove 20 mm faced, including
2 setscrews for each unit.ApplicationTo mount electrodes and workpieces with shaft sizes of up to 20 mm.MountingInsert and tighten setscrews. If necessary, center with spacer plate ER-010532. Operating manual
ER-103744Uniplate
10 pieces
Enlarge image
Request offer
VersionSet of 10 units, surface 51 x 51 mm faced, including 2 x M6 bolts for each unit.ApplicationTo mount electrodes and workpieces with a base surface of more than 50 mm.To fit blankWith 2 x M6 bolts into the base surface. Operating manual
EWIS compatible Holders & Pallets
ER-009223Uniholder EWISTM
12 pieces
Enlarge image
Request offer
VersionSet of 12 units, prepared for the installation of the code carrier. Order EWIS
TM
chip, ER-035154 separately!
ER-010063Prisround EWISTM
12 pieces
Enlarge image
Request offer
VersionSet of 12 units, prepared for the installation of the code carrier. Order EWIS
TM
chip, ER-035154 separately!
ER-010596Uniblank EWISTM
12 pieces
Enlarge image
Request offer
VersionSet of 12 units, prepared for the installation of the code carrier. Order EWIS
TM
chip, ER-035154 separately!
ER-010644Uniplate EWISTM
12 pieces
Enlarge image
Request offer
VersionSet of 12 units, prepared for the installation of the code carrier. Order EWIS
TM
chip, ER-035154 separately!
ER-035097Blank holder ø 20 / ø 72
6 pieces
Enlarge image
Request offer
VersionSet of 6 units, system size ITS 50.
Without chucking spigots.ApplicationTo clamp cylindrical parts with ø 20 mm.
Technical data EROWA Holder ø 72
Material: Steel, corrosion-resistant
System accuracy, chuck: 0.002 mm / 0.00080″
Recommended max. weight with electrode: 20 kg / 44 lbs
Handling: With EROWA handling systems or electrode changers.
ER-035114Blank holder ø 10 / ø 72
6 pieces
Enlarge image
Request offer
VersionSet of 6 units, system size ITS 50.
Without chucking spigots.ApplicationTo clamp cylindrical parts with ø 10 mm.
Technical data EROWA Holder ø 72
Material: Steel, corrosion-resistant
System accuracy, chuck: 0.002 mm / 0.00080″
Recommended max. weight with electrode: 20 kg / 44 lbs
Handling: With EROWA handling systems or electrode changers.
ER-035117Blank holder ø 72 without borehole
6 pieces
Enlarge image
Request offer
VersionSet of 6 units, system size ITS 50.
Without chucking spigots.ApplicationTo clamp cylindrical parts.MountingAttachment borehole up to max. ø 12 mm to be drilled according to requirements.
Technical data EROWA Holder ø 72
Material: Steel, corrosion-resistant
System accuracy, chuck: 0.002 mm / 0.00080″
Recommended max. weight with electrode: 20 kg / 44 lbs
Handling: With EROWA handling systems or electrode changers.
ER-035209Prisround ø 72
6 pieces
Enlarge image
Request offer
VersionSet of 6 units, system size ITS 50.
Without chucking spigots.ApplicationTo mount electrodes and workpieces with shafts
of up to square 25 mm.
Technical data EROWA Holder ø 72
Material: Steel, corrosion-resistant
System accuracy, chuck: 0.002 mm / 0.00080“
Recommended max. weight with electrode: 20 kg / 44 lbs
Handling: With EROWA handling systems or electrode changers.
ER-035210Uniblank ø 72
6 pieces
Enlarge image
Request offer
VersionSet of 6 units, system size ITS 50.
Without chucking spigots.ApplicationTo mount electrodes and workpieces of various shapes.MountingAttachment boreholes to be drilled according to requirements.
Technical data EROWA Holder ø 72
Material: Steel, corrosion-resistant
System accuracy, chuck: 0.002 mm / 0.00080“
Recommended max. weight with electrode: 20 kg / 44 lbs
Handling: With EROWA handling systems or electrode changers.
ER-035211Uniholder ø 72
6 pieces
Enlarge image
Request offer
VersionSet of 6 units, system size ITS 50.
Without chucking spigots.ApplicationTo mount electrodes and workpieces with shaft
of up to 20 mm.
Technical data EROWA Holder ø 72
Material: Steel, corrosion-resistant
System accuracy, chuck: 0.002 mm / 0.00080″
Recommended max. weight with electrode: 20 kg / 44 lbs
Handling: With EROWA handling systems or electrode changers.
ER-035212Uniplate ø 72
6 pieces
Enlarge image
Request offer
VersionSet of 6 units, includes 12 PinLock locking pins. System size ITS 50, without chucking spigots.ApplicationTo mount electrodes and workpieces with surface more than square 40 x 40 mm or ø 50 mm.MountingWith two PinLock locking pins.
Technical data EROWA Holder ø 72
Material: Steel, corrosion-resistant
System accuracy, chuck: 0.002 mm / 0.00080″
Recommended max. weight with electrode: 20 kg / 44 lbs
Handling: With EROWA handling systems or electrode changers.
ER-036658Centering plate G Inox
5 pieces
Enlarge image
Request offer
VersionGround including 8 supporting feet M8 per plate.ApplicationFor workpieces, jigs and fixtures in chip-removal machining.MountingAccording to accompanying fitting instructions.
ER-044099ITS Electrode holder Set
12 pieces
