UPC Chuck with ITS integrated
ER-070649UPC chuck with ITS Chuck 100 P
Enlarge image
Request offer
VersionUPC with ITS chuck 100P fitted and aligned.ConnectionsThrough the base and on the side.ApplicationOn milling, grinding, drilling and EDM sinking centers. In production lines.
Technical data UPC
Repeatability 0.002 mm
Indexing 4 x 90° divisible, pallet position-oriented
Chuck clamping power 32’000 N, generated by springs
Chuck opens with 6 bar air pressure, dry
Recommended workpiece size: 500x500x350 (20x20x14″)mm
Operating manual
Request PDF
UPC P Chucks
ER-016841UPC P chuck
Enlarge image
Request offer
VersionChuck for high machining forces during chip removal.ConnectionsThrough the base and on the side.ApplicationOn milling, grinding, drilling and EDM centers and in production lines.OptionUPC Sealing-Set ER-016650.
Operating manual
Request PDF
ER-030581UPC P / PowerChuck P kit automatic
composed of:
Enlarge image
Request offer
VersionUPC P with air dock for the automatic operation of PowerChuck P.Content1 x ER-028784, UPC P with air duct and UPC seal kit
1 x ER-030580, PowerChuck P on UPC pallet with air duct
1 x Pneumatic tube.Requirements*At least 4 air ducts available on the machine table.
*Air ducts for the PowerChuck P are only possible laterally. If required, spacer plate can be used.Please noteFurther system adaptations on request!
Operating manual
Request PDF
ER-078728UPC P with connection on TK 57 mm
with 2 air docks
Enlarge image
Request offer
VersionChuck for high machining forces during chip removal.ConnectionsThrough the base on pitch circle 57 mm and on the side.ApplicationFor milling, grinding, drilling and EDM centers and in production lines.OptionUPC Sealing kit ER-016650 and ER-030580. Further system adaptations on request.
Technical data UPC
Repeatability 0.002 mm
Indexing 4 x 90°
Clamping force 50’000 N, generated by springs
Chuck opens with 6 bar air pressure, dry
Recommended workpiece size: 500x500x500 mm(20x20x20″)
Operating manual
Request PDF
UPC Standard Chuck
ER-074524UPC chuck
Enlarge image
Request offer
VersionUPC, prepared to accommodate an ITS chuck 100P.ConnectionsThrough the base and on the side.ApplicationOn milling, grinding, drilling and EDM sinking centers. In production lines.
Technical data UPC
Repeatability 0.002 mm
Indexing 4 x 90° divisible, pallet position-oriented
Chuck clamping power 32’000 N, generated by springs
Chuck opens with 6 bar air pressure, dry
Recommended workpiece size: 500x500x350mm (20x20x14″)
CPWS is China manufacturer of precision workholding for chip removal，CNC machining centers，CPWS is compatible with EROWA,at lower cost, good precision，ER-070649 ER-016841 ER-074524 ER-030581 ER-078728
www.workholdingtool.com,sara@workholdingtool.com
www.erowa-system3r-edm.com