CPWS Blog
    Contact Us
    Position:Home > CPWS Blog

    CPWS-Precision workholding fixture for chip removal EROWA UPC chuck Universal Power Chuck

    2018-3-5      View:

     

    UPC Chuck with ITS integrated

    ER-070649UPC chuck with ITS Chuck 100 P

    EDM PPM
    VersionUPC with ITS chuck 100P fitted and aligned.ConnectionsThrough the base and on the side.ApplicationOn milling, grinding, drilling and EDM sinking centers. In production lines.
    Technical data UPC
    Repeatability 0.002 mm
    Indexing 4 x 90° divisible, pallet position-oriented
    Chuck clamping power 32’000 N, generated by springs
    Chuck opens with 6 bar air pressure, dry

    Recommended workpiece size: 500x500x350 (20x20x14")mm

    Operating manual
     

    UPC P Chucks

    ER-016841UPC P chuck

    EDM PPM
    VersionChuck for high machining forces during chip removal.ConnectionsThrough the base and on the side.ApplicationOn milling, grinding, drilling and EDM centers and in production lines.OptionUPC Sealing-Set ER-016650.

    Operating manual
     

    ER-030581UPC P / PowerChuck P kit automatic
    composed of:

    EDM PPM
    VersionUPC P with air dock for the automatic operation of PowerChuck P.Content1 x ER-028784, UPC P with air duct and UPC seal kit
    1 x ER-030580, PowerChuck P on UPC pallet with air duct
    1 x Pneumatic tube.Requirements*At least 4 air ducts available on the machine table.
    *Air ducts for the PowerChuck P are only possible laterally. If required, spacer plate can be used.Please noteFurther system adaptations on request!

    Operating manual
     

    ER-078728UPC P with connection on TK 57 mm
    with 2 air docks

    EDM PPM
    VersionChuck for high machining forces during chip removal.ConnectionsThrough the base on pitch circle 57 mm and on the side.ApplicationFor milling, grinding, drilling and EDM centers and in production lines.OptionUPC Sealing kit ER-016650 and ER-030580. Further system adaptations on request.
    Technical data UPC
    Repeatability 0.002 mm
    Indexing 4 x 90° 
    Clamping force 50’000 N, generated by springs
    Chuck opens with 6 bar air pressure, dry

    Recommended workpiece size: 500x500x500 mm(20x20x20")

    Operating manual
     

    UPC Standard Chuck

    ER-074524UPC chuck

    EDM PPM
    VersionUPC, prepared to accommodate an ITS chuck 100P.ConnectionsThrough the base and on the side.ApplicationOn milling, grinding, drilling and EDM sinking centers. In production lines.
    Technical data UPC
    Repeatability 0.002 mm
    Indexing 4 x 90° divisible, pallet position-oriented
    Chuck clamping power 32’000 N, generated by springs
    Chuck opens with 6 bar air pressure, dry

    Recommended workpiece size: 500x500x350mm (20x20x14")

     

    CPWS is China manufacturer of precision workholding for chip removal,CNC machining centers,CPWS is compatible with EROWA,at lower cost, good precision,ER-070649  ER-016841 ER-074524 ER-030581  ER-078728   www.workholdingtool.com,sara@workholdingtool.com www.erowa-system3r-edm.com