CPWS Blog
    Contact Us
    Position:Home > CPWS Blog

    China manufacturer CPWS--compatible EROWA precision workholding pallet

    2018-3-5      View:

    Standard Pallets / Holders

    ER-032730Pallet kit ø 115 MS
    4 pieces, composed of:

    EDM WEDM PPM
    VersionStandard type, punched centering plates.ApplicationFor electrodes and workpieces in EDMMountingThrough pallet with 4xM8 bolts or through blank with 4xM10 bolts.
    Operating manual
     

    ER-032731Pallet kit ø 148 MS EWISTM
    4 pieces, composed of:

    EDM WEDM PPM
    VersionStandard type, punched centering plates.ApplicationFor electrodes and workpieces, and for the construction of fixtures.MountingThrough pallet with M8 bolts or through blank with M10 bolts.
    Operating manual
     

    ER-032732Pallet kit ø 148 G EWISTM
    4 pieces, composed of:

    EDM WEDM PPM
    VersionStandard type, ground centering plates.ApplicationTo accommodate workpieces and fixtures in chip-cutting machining processes.MountingThrough pallet with M8 bolts or through blank with M10 bolts.
    Operating manual
     

    ER-033048Pallet Kit ø 148 G EWISTM
    4 pieces, composed of:

    EDM WEDM PPM
    VersionWithout bore holes apart from center borehole
    and borehole for reference bolt.ApplicationFor work pieces machined in chip-cutting machining.MountingAccording to your preference.
    Operating manual
     

    ER-033051Pallet Kit ø 148 MS ALU R25
    4 pieces, composed of:

    EDM PPM
    VersionBody of casted aluminum with borehole pattern 25,
    ø 10 F7, thread M10.ApplicationPalletizing of workpieces and electrodes, mounting of fixtures and ClampSet Base 220.MountingThrough pallet with M8 bolts or through blank with M10 bolts.
    Operating manual
     

    ER-033053Pallet Kit ø 148 G R25
    4 pieces, composed of:

    EDM PPM
    VersionSteel, nitride coated, with borehole pattern 25,
    ø 10 F7, thread M10.ApplicationTo accommodate EROWA ClampSet Base 220 or specially constructed fixtures and gauges.
    Operating manual
     

    ER-033058Pallet Kit ø 148 G Alu EWISTM
    4 pieces, composed of:

    EDM WEDM PPM
    VersionWithout hole grid apart from center borehole
    and borehole for reference bolt.ApplicationFor workpieces machined in chip-cutting machining.MountingAccording to your preference.

    Operating manual
     

    ER-041924Pallet Kit P ø 148 Inox
    4 pieces, composed of:

    EDM WEDM PPM
    VersionSteel, corrosion-resistant. Centering integrated in
    the pallet.ApplicationFor use on all EROWA PowerChucks P and ProductionChuck 210 Combi. To accommodate workpieces and fixtures in chip-cutting machining processes.MountingThrough pallet with M8 bolts or through blank with M10 bolts.
    Operating manual
     

    EWIS compatible Holders & Pallets

    ER-008517Pallet G ø 115 EWISTM

    EDM WEDM PPM
    VersionStandard type, ground centering plates.ApplicationFor electrodes and workpieces in EDM.MountingThrough pallet with 4xM8 bolts or through blank with 4xM10 bolts.
    Operating manual
     

    ER-008519Pallet ø 115 MS EWISTM

    EDM WEDM PPM
    VersionStandard type, punched centering plates.ApplicationFor electrodes and workpieces in EDMMountingThrough pallet with 4xM8 bolts or through blank with 4xM10 bolts.
    Operating manual
     

    ER-008547Support foot SW13/L=16/L1=10.2
    20 pieces

    EDM WEDM PPM
    ApplicationSet of 20 supportfeet.
    ER-022457 L = 16 in combination with.
    G-centering plates,
    Position outside the centering plate.
    ER-008547 L = 16 for punched centering plates,
    ER-008553 L = 21 for G-centering plates.
    Operating manual
     

    ER-015042Pallet ø 148 MS ALU R25

    EDM PPM
    VersionBody of casted aluminum with borehole pattern 25,
    ø 10 F7, thread M10.ApplicationPalletizing of workpieces and electrodes, mounting of fixtures and ClampSet Base 220.MountingThrough pallet with M8 bolts or through blank with M10 bolts.
    Operating manual
     

    ER-015776Pallet ø 148 MS EWISTM

    EDM WEDM PPM
    VersionStandard type, punched centering plates.ApplicationFor electrodes and workpieces, and for the construction of fixtures.MountingThrough pallet with M8 bolts or through blank with M10 bolts.
    Operating manual
     

    ER-015777Pallet ø 148 G EWISTM

    EDM WEDM PPM
    VersionStandard type, ground centering plates.ApplicationTo accommodate workpieces and fixtures in chip-cutting machining processes.MountingThrough pallet with M8 bolts or through blank with M10 bolts.
     
    Operating manual
     

    ER-015899Pallet ø 148 G R25

    EDM PPM
    VersionSteel, nitride coated, with borehole pattern 25,
    ø 10 F7, thread M10.ApplicationTo accommodate EROWA ClampSet Base 220 or specially constructed fixtures and gauges.
    Operating manual
     

    ER-032699Pallet ø 148 G EWISTM

    EDM WEDM PPM
    VersionWithout bore holes apart from center borehole
    and borehole for reference bolt.ApplicationFor work pieces machined in chip-cutting machining.MountingAccording to your preference.
    Operating manual
     

    ER-032729Pallet kit G ø 115
    4 pieces, composed of:

    EDM WEDM PPM
    VersionStandard type, ground centering plates.ApplicationFor electrodes and workpieces in EDM.MountingThrough pallet with 4xM8 bolts or through blank with 4xM10 bolts.
    Operating manual
     

    ER-041912Pallet P ø 148 Inox

    EDM PPM
    VersionSteel, corrosion-resistant. Centering integrated in
    the pallet.ApplicationFor use on all EROWA PowerChucks P and ProductionChucks 210 Combi. To accommodate workpieces and fixtures in chip-cutting machining processes.MountingThrough pallet with M8 bolts or through blank with M10 bolts.
    Operating manual
     

    ER-068585Manual 3-jaw concentric chuck ø 125 mm
    on pallet ø 148 G

    EDM PPM
    VersionManual 3-jaw concentric chuck ø 125 mm. Central clamping range 3-53mm. Body made of cast metal. High degree of concentricity according to DIN 6386. Fitted to pallet ø 148 G. Includes 3 hardened drilling jaws (stepped on the outside), 3 hardened turning jaws (stepped on the inside) 1 spanner.NoteMax. speed 4000 min-¹.ApplicationIn combination with EROWA chucks on lathes, indexing tables, dividing heads, etc.Spare partsBlock jaws, soft, for 3-jaw chuck, set of 3, size 125mm.
    Operating manual
     

    ER-068586Manual 4-jaw concentric chuck ø 125 mm
    on pallet ø 148 G

    EDM PPM
    VersionManual 4-jaw concentric chuck ø 125 mm. Central clamping range 3-53mm. Body made of cast metal. High degree of concentricity according to DIN 6386. Fitted to pallet ø 148 G. Includes 4 hardened drilling jaws (stepped on the outside), 4 hardened turning jaws (stepped on the inside), 1 spanner.NoteMax. speed 4000 min-¹.ApplicationIn combination with EROWA chucks on lathes, indexing tables, dividing heads, etc.Spare partsBlock jaws, soft, for 4-jaw chuck, set of 4, size 125mm.
    Operating manual
     

    ER-068697Manual 3-jaw concentric chuck ø 140 mm
    on pallet ø 148 G

    EDM PPM
    VersionManual 3-jaw concentric chuck ø 140 mm. Central clamping range 3-53mm. Body made of cast metal. High degree of concentricity according to DIN 6386. Fitted to pallet ø 148 G. Includes 3 hardened drilling jaws (stepped on the outside), 3 hardened turning jaws (stepped on the inside) 1 spanner.NoteMax. speed 4000 min-¹.ApplicationIn combination with EROWA chucks on lathes, indexing tables, dividing heads, etc.Spare partsBlock jaws, soft, for 3-jaw chuck, set of 3, size 140mm.
    Operating manual
     

    ER-071970Pallet P ø 148, without hole pattern
    with center bore ø 12 H7

    EDM WEDM PPM
    VersionSteel, corrosion-resistant. Centering integrated in the pallet.ApplicationFor use on all EROWA PowerChucks P and ProductionChucks 210 Combi. To accommodate workpieces and fixtures in chip-cutting machining processes.MountingMounting holes can be drilled by the client.

    Operating manual
     

    ER-090744Magnetic clamping plate Neospark
    250 x 150 x 46

    CPWS is Chinese manufacturer of workholding jig fixture for sinker EDM,wire EDM,CNC machine center,CPWS is compatible with EROWA, 3R system, at lower cost ,good accuracy, CPWS exports to all over the world, fast shipping, www.workholdingtool.com,   www.erowa-system3r-edm.comsara@workholdingtool.com

    CPWS is Chinese manufacturer of workholding jig fixture for sinker EDM,wire EDM,CNC machine center,CPWS is compatible with EROWA, 3R system, at lower cost ,good accuracy, CPWS exports to all over the world, fast shipping, www.workholdingtool.com,   www.erowa-system3r-edm.comsara@workholdingtool.com